install flags: install
-
building install-recursive
-
Making install in lib
-
make[1]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/lib'
-
building install-am
-
make[2]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/lib'
-
building install-libLTLIBRARIES
-
test -z "/...-error-support/lib" || mkdir -p -- "/...-error-support/lib"
-
/bin/sh ../libtool --mode=install /...-coreutils-6.12/bin/install -c 'libErrorAPI.la' '/...-error-support/lib/libErrorAPI.la'
-
/...-coreutils-6.12/bin/install -c .libs/libErrorAPI.so /...-error-support/lib/libErrorAPI.so
-
/...-coreutils-6.12/bin/install -c .libs/libErrorAPI.lai /...-error-support/lib/libErrorAPI.la
-
/...-coreutils-6.12/bin/install -c .libs/libErrorAPI.a /...-error-support/lib/libErrorAPI.a
-
chmod 644 /...-error-support/lib/libErrorAPI.a
-
ranlib /...-error-support/lib/libErrorAPI.a
-
PATH="$PATH:/sbin" ldconfig -n /...-error-support/lib
-
../libtool: line 6688: ldconfig: command not found
-
----------------------------------------------------------------------
-
Libraries have been installed in:
-
/...-error-support/lib
-
-
If you ever happen to want to link against installed libraries
-
in a given directory, LIBDIR, you must either use libtool, and
-
specify the full pathname of the library, or use the `-LLIBDIR'
-
flag during linking and do at least one of the following:
-
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
-
during execution
-
- add LIBDIR to the `LD_RUN_PATH' environment variable
-
during linking
-
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
-
- have your system administrator run these commands:
-
PATH="$PATH:/sbin" ldconfig -n /...-error-support/lib
-
-
See any operating system documentation about shared libraries for
-
more information, such as the ld(1) and ld.so(8) manual pages.
-
----------------------------------------------------------------------
-
/bin/sh ../libtool --mode=install /...-coreutils-6.12/bin/install -c 'libLocationAPI.la' '/...-error-support/lib/libLocationAPI.la'
-
/...-coreutils-6.12/bin/install -c .libs/libLocationAPI.so /...-error-support/lib/libLocationAPI.so
-
/...-coreutils-6.12/bin/install -c .libs/libLocationAPI.lai /...-error-support/lib/libLocationAPI.la
-
/...-coreutils-6.12/bin/install -c .libs/libLocationAPI.a /...-error-support/lib/libLocationAPI.a
-
chmod 644 /...-error-support/lib/libLocationAPI.a
-
ranlib /...-error-support/lib/libLocationAPI.a
-
PATH="$PATH:/sbin" ldconfig -n /...-error-support/lib
-
../libtool: line 6688: ldconfig: command not found
-
----------------------------------------------------------------------
-
Libraries have been installed in:
-
/...-error-support/lib
-
-
If you ever happen to want to link against installed libraries
-
in a given directory, LIBDIR, you must either use libtool, and
-
specify the full pathname of the library, or use the `-LLIBDIR'
-
flag during linking and do at least one of the following:
-
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
-
during execution
-
- add LIBDIR to the `LD_RUN_PATH' environment variable
-
during linking
-
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
-
- have your system administrator run these commands:
-
PATH="$PATH:/sbin" ldconfig -n /...-error-support/lib
-
-
See any operating system documentation about shared libraries for
-
more information, such as the ld(1) and ld.so(8) manual pages.
-
----------------------------------------------------------------------
-
building install-includeHEADERS
-
test -z "/...-error-support/include" || mkdir -p -- "/...-error-support/include"
-
/...-coreutils-6.12/bin/install -c -m 644 'Location.h' '/...-error-support/include/Location.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'Location_dict.h' '/...-error-support/include/Location_dict.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'ParsedLocation.h' '/...-error-support/include/ParsedLocation.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'ParsedLocation_dict.h' '/...-error-support/include/ParsedLocation_dict.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'Error.h' '/...-error-support/include/Error.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'Error_dict.h' '/...-error-support/include/Error_dict.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'ParsedError.h' '/...-error-support/include/ParsedError.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'ParsedError_dict.h' '/...-error-support/include/ParsedError_dict.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'Error-utils.h' '/...-error-support/include/Error-utils.h'
-
/...-coreutils-6.12/bin/install -c -m 644 'Error-manager.h' '/...-error-support/include/Error-manager.h'
-
make[2]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/lib'
-
make[1]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/lib'
-
Making install in utils
-
make[1]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils'
-
building install-recursive
-
Making install in lift-error
-
make[2]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lift-error'
-
building install-am
-
make[3]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lift-error'
-
building install-binPROGRAMS
-
test -z "/...-error-support/bin" || mkdir -p -- "/...-error-support/bin"
-
/bin/sh ../../libtool --mode=install /...-coreutils-6.12/bin/install -c 'lift-error' '/...-error-support/bin/lift-error'
-
/...-coreutils-6.12/bin/install -c .libs/lift-error /...-error-support/bin/lift-error
-
make[3]: Nothing to be done for `install-data-am'.
-
make[3]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lift-error'
-
make[2]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lift-error'
-
Making install in lower-error
-
make[2]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lower-error'
-
building install-am
-
make[3]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lower-error'
-
building install-binPROGRAMS
-
test -z "/...-error-support/bin" || mkdir -p -- "/...-error-support/bin"
-
/bin/sh ../../libtool --mode=install /...-coreutils-6.12/bin/install -c 'lower-error' '/...-error-support/bin/lower-error'
-
/...-coreutils-6.12/bin/install -c .libs/lower-error /...-error-support/bin/lower-error
-
make[3]: Nothing to be done for `install-data-am'.
-
make[3]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lower-error'
-
make[2]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/lower-error'
-
Making install in error-diff
-
make[2]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/error-diff'
-
building install-am
-
make[3]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/error-diff'
-
building install-binPROGRAMS
-
test -z "/...-error-support/bin" || mkdir -p -- "/...-error-support/bin"
-
/bin/sh ../../libtool --mode=install /...-coreutils-6.12/bin/install -c 'error-diff' '/...-error-support/bin/error-diff'
-
/...-coreutils-6.12/bin/install -c .libs/error-diff /...-error-support/bin/error-diff
-
make[3]: Nothing to be done for `install-data-am'.
-
make[3]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/error-diff'
-
make[2]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils/error-diff'
-
make[2]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils'
-
building error-support.c
-
if [ -e error-support.h ]; then touch error-support.h; else cp ./error-support.h ./error-support.h; fi
-
if [ -e error-support.c ]; then touch error-support.c; else cp ./error-support.c ./error-support.c; fi
-
building error-support.o
-
gcc -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"error-support\" -DVERSION=\"1.6\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -D__EXTENSIONS__=1 -D_ALL_SOURCE=1 -D_GNU_SOURCE=1 -D_POSIX_PTHREAD_SEMANTICS=1 -D_TANDEM_SOURCE=1 -DALIGNOF_VOID_P=8 -DSIZEOF_VOID_P=8 -DSIZEOF_INT=4 -DSIZEOF_LONG=8 -DSIZEOF_DOUBLE=8 -I. -I. -I../lib -I/...-aterm-2.6pre24721-2ni86m6s/include -I/...-aterm-2.6pre24721-2ni86m6s/include -I/...-toolbuslib-1.1pre26401-67wqc7di/include -g -O2 -c error-support.c
-
building install-am
-
make[3]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils'
-
building install-binPROGRAMS
-
test -z "/...-error-support/bin" || mkdir -p -- "/...-error-support/bin"
-
/bin/sh ../libtool --mode=install /...-coreutils-6.12/bin/install -c 'error-support' '/...-error-support/bin/error-support'
-
/...-coreutils-6.12/bin/install -c .libs/error-support /...-error-support/bin/error-support
-
/bin/sh ../libtool --mode=install /...-coreutils-6.12/bin/install -c 'display-error' '/...-error-support/bin/display-error'
-
/...-coreutils-6.12/bin/install -c .libs/display-error /...-error-support/bin/display-error
-
building install-pkgdataDATA
-
test -z "/...-error-support/share/error-support" || mkdir -p -- "/...-error-support/share/error-support"
-
/...-coreutils-6.12/bin/install -c -m 644 'error-support.idef' '/...-error-support/share/error-support/error-support.idef'
-
make[3]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils'
-
make[2]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils'
-
make[1]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/utils'
-
Making install in doc
-
make[1]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/doc'
-
building install-am
-
make[2]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/doc'
-
make[2]: Nothing to be done for `install-exec-am'.
-
make[2]: Nothing to be done for `install-data-am'.
-
make[2]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/doc'
-
make[1]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6/doc'
-
make[1]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6'
-
building install-am
-
make[2]: Entering directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6'
-
make[2]: Nothing to be done for `install-exec-am'.
-
building install-pkgconfigDATA
-
test -z "/...-error-support/lib/pkgconfig" || mkdir -p -- "/...-error-support/lib/pkgconfig"
-
/...-coreutils-6.12/bin/install -c -m 644 'error-support.pc' '/...-error-support/lib/pkgconfig/error-support.pc'
-
make[2]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6'
-
make[1]: Leaving directory `/tmp/nix-build-gcasll3agh36vh9v1qcvq7wwyhlg5xm2-error-support.drv-0/error-support-1.6'